Lenovo z/p series, Z400 – Lenovo IdeaPad P500 Touch Notebook User Manual
Page 75
71
Lenovo Z/P Series
Figure 14. Removal steps of LCD unit (continued)
Release the LCD cable from the cable guides in the direction shown by arrows
2
. Then lift the LCD hinge in the direction shown by arrow
3
.
Z400
3
2
2
2
3
Z500/P500
3
2
2
2
3
When installing:
Route the antenna cables along the cable guides. As you route the cables,
•
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached firmly and make sure that you
•
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
This manual is related to the following products: