Lenovo IdeaPad P500 Touch Notebook - Manual (Page 56)

52
Z/P Series Hardware Maintenance Manual
1080 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 36
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
Figure 8. Removal steps of fan assembly and heat sink assembly
Detach the fan connector in the direction shown by arrow 1 , and then remove
a total of six screws (three
2
, two
3
and one
4
).
Z400
4
3
3
2
2
1
Step Screw (quantity) Color Torque
2
M2 × 3.2, flat-head, nylok-coated (3) Black 1.85+/-0.15 kgf*cm
3
M2 × 3, flat-head, nylok-coated (2) Black 1.85+/-0.15 kgf*cm
4
M2.5 × 6, flat-head, nylok-coated (1) Black 3.0+/-0.3 kgf*cm