Seiwa SWRx series - Manual (Page 32)

34 User Manual
pages assignable to the soft key pressed.
Only For SEAWAVE
3 :
In all data pages the user can customize the Function Keys. Pressing and holding
down for 1 second the numeric key [1], [2], [3], [4], [5] it will be possible to
assign a different selection to the relative Function Key.
Move the Cursor key up/down to place the selector on the desired item; move the
Cursor key to the right or press [ENTER] to set the selected item; move the
Cursor key to the left or press [CLEAR] to close the pop-up window.
See the example displaying in the picture below, the four soft keys are customized
to select four among the available Radar pages:
Fig. 3.1.1 - Example of Radar page selection by Soft Key on SW1101
Press [Rd Std] to show the Full page, [Rd+Map] to show the Radar Split Chart
page, [Rd+FF] to show the Radar Split Fish Finder page, [Rd+Data] to show
the Radar Split Data page. It is possible another choice, [Combo 4] to show the
Radar/Chart/Fish Finder/Highway page.
3.2 STATUS BAR
You may choose to select the data displayed in the boxes in the system set up.
1
5
3
2
4
8
7
6
RNG (Radar Range) and Range rings interval
Current Heading
Motion Mode and Heading Mode indication
Gain and STC/FTC indication
Expansion and Interference Rejection
Guard Zone alarms and Trails
Ship Speed Over Ground and Course Over
Ground
Ship Distance and Bearing from destination
Ship Lat/Lon
Cursor Window
9
10
5
3
2
8
7
4
1
6
9
10
Fig.3.2 - The Default Status Bar