AT&T 9465 - Manual (Page 52)

If CL appears in the Message Window:
You need to reset the clock.
If the system does not respond to commands from a remote
touch tone phone:
• Make sure you are calling from a touch tone phone. When you dial a
number, you should hear tones. If you hear clicks instead, the phone is
not a touch tone telephone.
• The answering system may not detect the Remote Access Code while
your announcement is playing. Try waiting until the announcement is
over before entering the code.
• Make sure you enter your Remote Access Code correctly.
• There may be noise or interference on the phone line you are using.
Press keys firmly.
If your outgoing announcement isn’t clear:
• If you record your announcement at the base, make sure you speak in
a normal tone of voice, about nine inches from the base.
• Make sure there is no “background” noise (TV, music, etc.) while you
are recording.
• For best sound quality, record the announcement using the cordless
handset.
IN CASE OF DIFFICULTY
50
IN C
ASE OF DIFFICUL
TY
9465 book_1ATT 2/29/00 11:24 PM Page 50