AT&T 9465 - Manual (Page 20)

Redial
The last number dialed on this phone (up to 24 digits) is stored in redial
memory until you dial another number.
1 Press
P. Wait for the dial tone and
for the to appear.
2 Use the softkey to select REDIAL.
( REDIAL does not appear on the screen if
there is no number in redial memory.)
NOTE: MEM in the screen display refers to
telephone memory. For Telephone Memory
Features, see TELEPHONE MEMORY/DIRECTORY
starting on page 23.
Redial Plus
The handset stores the last five numbers dialed.
1 Make sure the phone is off ( is not
displayed).
2 Press U, then >.
3 Select REDIAL +.
4 Use < and > to scroll through the last
five numbers dialed.
5 Press to call the displayed
number.
Temporary Tone
If you have dial pulse (rotary) service, you can press * during a call to
switch to touch tone dialing.
1 Dial the call.
2 Press *. Buttons pressed after this send tone signals.
3 When you hang up or press , the phone automatically
returns to dial pulse (rotary) dialing.
TELEPHONE OPERATION
AT THE HANDSET
18
5550123
MEM REDIAL
5550123
MENU
SETUP REDIAL +
TELEPHONE OPERA
TION
9465 book_1ATT 2/29/00 11:23 PM Page 18