AT&T 9465 - Manual (Page 43)

If you receive a call from an area code not programmed in the phone, you
will see 10 digits on the screen (the area code and the phone number).
The phone will automatically dial “1” before the number when you press
.
If you try to use the Display Dial feature, but your call cannot be completed
unless you dial “1” before the number, follow the steps below:
1 Press < or > to locate the number you
want to call.
2 Press U.
3 Press > until the screen displays DIAL +1.
4 Select DIAL +1 to dial the number.
Delete Call Records from Call History
NOTE: Once you delete a call from call history, you cannot retrieve the
call information.
Delete a Specific Call Record
1 Press < or > to scroll to the record you
want to remove.
2 Press U while the call information is
displayed.
3 Use the softkey to select DELETE. The
handset beeps and deletes the call record.
The screen displays
DELETED.
CALLER ID OPERATION
41
3175550123
DIAL +1 DONE
3175550123
DELETE STORE
DELETED
C
ALLER ID
9465 book_1ATT 2/29/00 11:24 PM Page 41