AT&T 9465 - Manual (Page 48)

BATTERIES
46
BA
TTERIES
Replace the Handset Battery Pack
1 Remove the battery compartment cover on the handset by
pressing on the indentation and sliding the cover downward.
2 Lift out the old battery pack.
3 Hold the new battery pack and plug the connector into the
handset. Place the battery pack into the compartment.
4 Replace the cover by sliding it on its track up over the battery
case until it snaps firmly into place.
5 The new battery pack must be charged before using the
phone. Place the handset face up or face down in the base and
allow it to charge for at least 12 hours the first time. After the first
charge, the battery will quick charge in only six hours. The
telephone might operate before that, but for best performance, let
the battery pack charge fully.
NOTE: The handset cannot be charged in the face-up position if the
belt clip is attached.
9465 book_1ATT 2/29/00 11:24 PM Page 46