Norgren Lubricators - Manual (Page 8)

See Section ALE-25 for Accessories
Littleton, CO USA Phone 303-794-2611 Fax 303-795-9487
L72M, L72C
● Excelon design allows in-line or modular installation
● Quick release bayonet bowl
● Flow sensor provides a consistent oil/air ratio over a
wide range of flows
● Highly visible, prismatic liquid level indicator lens on
metal bowls
● All round (360°) visibility of sight-feed dome for ease
of drip rate setting
● Modular installations with Excelon 72, 73, and 74
series can be made to suit particular applications
Use Micro-Fog models in applications with one or more points of
lubrication.
Use Oil-Fog models to lubricate a single tool, cylinder or other air
driven device.
Excelon 72 Micro-Fog and Oil-Fog
Lubricator 1/4", 3/8" Port Sizes
ALE-14-4
Alternative Models L 7 2 - ★ ★ ★ - ★ P ★ ★
Type Substitute
Oil-Fog C
Micro-Fog M
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Port Size Substitute
1/4" 2
3/8" 3
Options Substitute
None N
Pyrex dome P†
Drain Substitute
Closed bottom bowl E
1/4 turn manual Q
† For use with metal bowl with Pyrex sight glass
Bowl Substitute
Short metal with plastic liquid level indicator D
Short metal with Pyrex liquid level indicator R
Long metal with plastic liquid level indicator E
Long metal with Pyrex liquid level indicator U
Short transparent without guard T
Long transparent without guard L
Long transparent with guard W
Ordering Information. Models listed include PTF threads, manual drain, and long transparent bowl without guard.
* Typical flow with 90 psig (6.3 bar) inlet pressure and a pressure drop of 7 psig (0.5 bar).
Type Main Port Size Model Number Flow* scfm (dm 3 /s) Weight lb (kg) †
Micro-Fog 1/4" L72M-2AP-QLN 51 (24) 1.1 (0.49)
3/8" L72M-3AP-QLN 51 (24) 1.1 (0.49)
Oil-Fog 1/4" L72C-2AP-QLN 51 (24) 1.1 (0.49)
3/8" L72C-3AP-QLN 51 (24) 1.1 (0.49)