Norgren Lubricators - Manual (Page 24)

See Section ALE-25 for Accessories
ALE-14-20 Littleton, CO USA Phone 303-794-2611 Fax 303-795-9487
10-015, 10-065
● Provides centralized air-borne lubrication for
machine bearings, gears, chains, slides, ways, etc
● Controls can be installed to start-up and shut-down
the lubricator with the machine
● Delivers a fog of oil to the application points, coating
bearing surfaces with a thin oil film and reducing oil
consumption
● Air carrying the lubricants passes through the
bearing housing, reducing bearing temperature and
contamination, providing longer bearing life
● The 2 and 5 U.S. gallon (8 and 20 liter) reservoirs are
rated to ASME Pressure Vessel Code, Section VIII
● Refer to Norgren Publication NT-1 for system design,
bearing-inch ratings, and reclassifier selection
Micro-Fog® Machine Bearing Lubricator
8 to 32 Bearing Inch Ratings 1/4" Port Size
ISO Symbol
With Drain
Model Number Reservoir - Nominal Size Reservoir - Working Capacity Weight lbs (kg)
10-015-100 * 1/2 pint (0.25 liter) — 2 (0.91)
10-015-002 1/2 pint (0.25 liter) 5 fluid ounce (0.15 liter) 2 (0.91)
10-015-504 1 quart (1 liter) 19 fluid ounce (0.56 liter) 4.0 (1.8)
10-015-005 2 quart (2 liter) 45 fluid ounce (1.33 liter) 6 (2.72)
10-065-006 2 U.S. gallon (8 liter) 113 fluid ounce (3.34 liter) 15.4 (7.0)
10-065-007 5 U.S. gallon (20 liter) 316 fluid ounce (9.34 liter) 28 (12.7)
Ordering Information. Models listed have 1/4" PTF threads and are rated from 8 to 32 bearing inches.
* Equipped with factory installed remote fill device.
Alternative Models
★ 0 - ★ ★ ★ ★ ★ - - 0 1
Option Add
Wall bracket attached to 10-015 -1B
models
Quick fill
-2H
Pyrex sight feed dome -7C
Low oil level switch with 10-015-504 -3A
Low oil level switch with 10-015-005 -3A
Low oil level switch with 10-065-006 -3D
Low oil level switch with 10-065-007 -3E
Bowl guard for 0.5 pint reservoir -2U
★