Norgren Lubricators - Manual (Page 18)

See Section ALE-25 for Accessories
Littleton, CO USA Phone 303-794-2611 Fax 303-795-9487
L17
● All around (360°) visibility of the sight-feed dome
simplifies installation and adjustment
● Screw-on bowl reduces maintenance time
● Can be serviced without the use of tools or removal
from the air line
● Flow sensor design provides a nearly constant oil/air
ratio over a wide range of air flows
Use Micro-Fog models in applications containing one or more
points of lubrication
Use Oil-Fog models to lubricate a single tool, cylinder, or other air
driven device
17 Series Micro-Fog and Oil-Fog Lubricators
3/4", 1", 1-1/4" and 1-1/2" Port Sizes
ALE-14-14
ISO Symbol
Manual drain
Alternative Models - ★ ★ ★ ★ ★ ★ - 1 ★ L 7
Threads Substitute
PTF A
ISO Rc taper B
BSPP (1-1/2" ported units) C
ISO G parallel (not available G
with 1-1/2" ported units)
Reservoir Substitute
1 quart US (1 liter) metal, drain, sight glass D
1 quart US (1 liter) metal, remote fill, sight glass 4
2 quart US (2 liter) metal, drain, sight glass H
2 gallon US (8 liter) metal, drain, sight glass J
5 gallon US (20 liter) metal, drain, sight glass K
Lubricator Type Substitute
Micro-Fog M
Oil-Fog O
Port Size Substitute
3/4" 6
1" 8
1-1/4" A
1-1/2" B
Flow Substitute
Bi-directional (Oil-Fog only) E
Uni-directional P
Option Substitute
Not applicable 00
Ordering Information. Models listed are uni-directional and include a 1 quart US (1 liter) metal bowl with drain, sight glass, and PTF threads.
Port Size Micro-Fog Models* Oil-Fog Models* Flow † scfm ( dm 3 /s) Weight lbs ( kg)
3/4" L17-600-MPDA L17-600-OPDA 160 (76) 3.73 (1.69)
1" L17-800-MPDA L17-800-OPDA 275 (130) 3.56 (1.62)
1-1/4" L17-A00-MPDA L17-A00-OPDA 275 (130) 4.65 (2.11)
1-1/2" L17-B00-MPDA L17-B00-OPDA 275 (130) 3.67 (1.67)
* Models listed in the order table must not be located downstream of frequently cycling directional control valves. Order the optional
bi-directional Oil-Fog Lubricator for use under such conditions.
† Typical flow with 90 psig (6.3 bar) inlet pressure and a pressure drop of 5 psig (0.35 bar).