MSI X2-109 v1 - Manual (Page 54)

4-2 MegaCLI Command Tool
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
4.1 MegaCLI CT Overview
MegaCLI CT and MegaDCLI CT are command line interface applications
you can use to configure and manage storage configurations under
Embedded MegaRAID Software. You can use these command tools to
perform the following tasks:
•
Configure logical drives and create configurations on the adapter
•
Display the configuration on the adapter
•
Display and change logical drive’s properties on the adapter
•
Display and change physical drive’s properties on the adapter
•
Display and change adapter properties
•
Load a configuration to the adapter from a file
•
Save an adapter configuration to a file
•
Start or stop rebuild, consistency check, and initialization
•
Suspend and display an ongoing background initialization
•
Display relevant user messages on the console or write them to the
log file
•
Work in silent mode, if selected (no messages are displayed on the
console)
•
Display adapter inventory data in a single command
•
Customize output strings
•
Exit with predefined success or failure exit codes
•
Set some predefined environment variables, such as number of
adapters and number of logical drives after the execution of CT
•
Display help on how to use the command line options of CT
4.2 Exception Handling
MegaCLI CT exits with exit code 0 for all successful operations. In case
of failure, it exits with exit code 1 to 255, depending on the failure
conditions. For example, assume that a rebuild is started on three
physical drives. MegaCLI CT successfully starts rebuilding the first drive