Cirrus Logic CS42426 User Manual
Features, General description, Six 24-bit d/a, two 24-bit a/d converters
Copyright
Cirrus Logic, Inc. 2014
(All Rights Reserved)
114 dB, 192-kHz 6-Ch CODEC with PLL
Features
Six 24-bit D/A, two 24-bit A/D Converters
114 dB DAC / 114 dB ADC Dynamic Range
-100 dB THD+N
System Sampling Rates up to 192 kHz
Integrated Low-Jitter PLL for Increased System
Jitter Tolerance
PLL Clock or System Clock Selection
7 Configurable General-Purpose Outputs
ADC High-Pass Filter for DC Offset Calibration
Expandable ADC Channels and One-Line
Mode Support
Digital Output Volume Control with Soft Ramp
Digital ±15 dB Input Gain Adjust for ADC
Differential Analog Architecture
Supports Logic Levels between 1.8 V and 5 V
General Description
The CS42426 provides two analog-to-digital and six
digital-to-analog delta-sigma converters, as well as an
integrated PLL.
The CS42426 integrated PLL provides a low-jitter sys-
tem clock. The internal stereo ADC is capable of
independent channel gain control for single-ended or
differential analog inputs. All six channels of DAC pro-
vide digital volume control and differential analog
outputs. The general-purpose outputs may be driven
high or low, or mapped to a variety of DAC mute con-
trols or ADC overflow indicators.
The CS42426 is ideal for audio systems requiring wide
dynamic range, negligible distortion and low noise, such
as A/V receivers, DVD receivers, and digital speakers.
The CS42426 is available in a 64-pin LQFP package in
Commercial (-10° to +70° C) grades. The CDB42428
Customer Demonstration board is also available for de-
vice evaluation. Refer to
PLL
Internal Voltage
Reference
RST
GPO1
AD0/CS
SCL/CCLK
SDA/CDOUT
AD1/CDIN
VLC
AOUTA1+
AOUTA1-
AOUTB1+
AOUTA3+
AOUTA3-
AOUTA2-
AOUTB2-
AOUTA2+
AOUTB2+
AOUTB1-
AOUTB3+
AOUTB3-
AINL+
AINL-
AINR+
AINR-
FILT+
REFGND VQ
ADC#1
ADC#2
Digital Filter
Digital Filter
Gain & Clip
Gain & Clip
ADC_SDOUT
ADCIN1
ADCIN2
DAC_SCLK
DAC_LRCK
DAC_SDIN3
DAC_SDIN2
DAC_SDIN1
VLS
ADC_LRCK
DGND VD
OMCK
RMCK LPFLT
INT
Control
Port
DAC#1
DAC#2
DAC#3
DAC#4
DAC#5
DAC#6
Di
gita
l F
ilte
r
Vo
lu
m
e
C
on
tro
l
GPO2
GPO3
GPO4
GPO5
GPO6
GPO7
MUTEC
Mute
A
na
log
F
ilt
er
VA AGND
ADC
Serial
Audio
Port
Mult/Div
GPO
ADC_SCLK
Le
vel
T
ran
sla
to
r
Le
vel T
ran
sla
to
r
DA
C
Se
ria
l A
ud
io P
or
t
MAR '14
DS604F2
CS42426
Document Outline
- 1. Characteristics and Specifications
- Specified Operating Conditions
- Absolute Maximum Ratings
- Analog Input Characteristics
- A/D Digital Filter Characteristics
- Analog Output Characteristics
- D/A Digital Filter Characteristics
- Switching Characteristics
- Switching Characteristics - Control Port - I²C™ Format
- Switching Characteristics - Control Port - SPI™ Format
- DC Electrical Characteristics
- Digital Interface Characteristics
- 2. Pin Descriptions
- 3. Typical Connection Diagrams
- 4. Applications
- 4.1 Overview
- 4.2 Analog Inputs
- 4.3 Analog Outputs
- 4.4 Clock Generation
- 4.5 Digital Interfaces
- 4.6 Control Port Description and Timing
- 4.7 Interrupts
- 4.8 Reset and Power-Up
- 4.9 Power Supply, Grounding, and PCB Layout
- 5. Register Quick Reference
- 6. Register Description
- Table 5. DAC De-Emphasis
- Table 6. Digital Interface Formats
- Table 7. ADC One-Line Mode
- Table 8. DAC One-Line Mode
- Table 9. RMCK Divider Settings
- Table 10. OMCK Frequency Settings
- Table 11. Master Clock Source Select
- Table 12. PLL Clock Frequency Detection
- Table 13. Example Digital Volume Settings
- Table 14. ATAPI Decode
- Table 15. Example ADC Input Gain Settings
- 7. Parameter Definitions
- 8. Appendix A: External Filters
- 9. Appendix B: PLL Filter
- 10. Appendix C: ADC Filter Plots
- Figure 27. Single-Speed Mode Stopband Rejection
- Figure 28. Single-Speed Mode Transition Band
- Figure 29. Single-Speed Mode Transition Band (Detail)
- Figure 30. Single-Speed Mode Passband Ripple
- Figure 31. Double-Speed Mode Stopband Rejection
- Figure 32. Double-Speed Mode Transition Band
- Figure 33. Double-Speed Mode Transition Band (Detail)
- Figure 34. Double-Speed Mode Passband Ripple
- Figure 35. Quad-Speed Mode Stopband Rejection
- Figure 36. Quad-Speed Mode Transition Band
- Figure 37. Quad-Speed Mode Transition Band (Detail)
- Figure 38. Quad-Speed Mode Passband Ripple
- 11. Appendix D: DAC Filter Plots
- Figure 39. Single-Speed (fast) Stopband Rejection
- Figure 40. Single-Speed (fast) Transition Band
- Figure 41. Single-Speed (fast) Transition Band (detail)
- Figure 42. Single-Speed (fast) Passband Ripple
- Figure 43. Single-Speed (slow) Stopband Rejection
- Figure 44. Single-Speed (slow) Transition Band
- Figure 45. Single-Speed (slow) Transition Band (detail)
- Figure 46. Single-Speed (slow) Passband Ripple
- Figure 47. Double-Speed (fast) Stopband Rejection
- Figure 48. Double-Speed (fast) Transition Band
- Figure 49. Double-Speed (fast) Transition Band (detail)
- Figure 50. Double-Speed (fast) Passband Ripple
- Figure 51. Double-Speed (slow) Stopband Rejection
- Figure 52. Double-Speed (slow) Transition Band
- Figure 53. Double-Speed (slow) Transition Band (detail)
- Figure 54. Double-Speed (slow) Passband Ripple
- Figure 55. Quad-Speed (fast) Stopband Rejection
- Figure 56. Quad-Speed (fast) Transition Band
- Figure 57. Quad-Speed (fast) Transition Band (detail)
- Figure 58. Quad-Speed (fast) Passband Ripple
- Figure 59. Quad-Speed (slow) Stopband Rejection
- Figure 60. Quad-Speed (slow) Transition Band
- Figure 61. Quad-Speed (slow) Transition Band (detail)
- Figure 62. Quad-Speed (slow) Passband Ripple
- 12. Package Dimensions
- 13. Ordering Information
- 14. References
- 15. Revision History