WIKA CF2S - Manual (Page 24)

Operating Instructions Temperature Indicating Controller CF2S
V1.2 • 08/2004 - 24 -
(7) Control output OFF function
A function to turn the control output OFF even if the power to the instrument is supplied.
The function is used when required to halt the control action or when the CF2S is not
being used in multiple controllers.
Control output OFF function can be selected from any mode by pressing the
key
for approx. 1 second.
The display is the same as when [Display selection when control output is off] is selected.
(See page 26.)
PV/SV display mode
Actual Main setting
temperature value
for approx. 1s [From any mode, as an example]
Control output OFF function 1s Manual reset setting
(*) [Unlit] Setting value
for approx. 1s
(*): PV display indicates [OFF indication], [No indication] or [Only PV]
selected in Display selection when control output is off (page 26).
Notice
Once the Control output OFF function is enabled, the function cannot be released
even if the power to the instrument is turned OFF and turned ON again.
To cancel the function, press the
key again for approx. 1 second.
In the program control, the Control output OFF function cannot be used because
the
key functions as Program Start/Stop key.