WIKA CPC2000 - Manual (Page 31)

31 WIKA operating instructions, model CPC2000
11155094.02 07/2012 GB/D/F/E
GB
10. Dismounting, return and disposal
3. First pull the power supply unit from the mains socket and then from the power supply
socket on the instrument.
4. Loosen the pressure connections
5. Do not close the pressure inputs!
6. Make sure there is no media left in the instrument.
10.2 Return
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazard-
ous substances (acids, bases, solutions etc.).
When returning the instrument, use the original packaging or a suitable transport
package.
To avoid damage:
1. Do not return the instrument with the pressure connections closed! Barometric
pressure changes can damage instruments with low pressure ranges.
2. Wrap the instrument in an antistatic plastic film.
3. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
4. If possible, place a bag, containing a desiccant, inside the packaging.
5. Label the shipment as transport of a highly sensitive measuring instrument.
Information on returns can be found under the heading “Service” on our
local website.
10.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.