WIKA PGS21 - Manual (Page 4)

WIKA operating instructions models PGS10, PGS11 and PGS21 4
1. General information
1. General information
■ The pressure gauge described in the operating instructions has been
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental
criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling
the instrument. Working safely requires that all safety instructions and
work instructions are observed.
■ Observe the relevant local accident prevention regulations and general
safety regulations for the instrument's range of use.
■ The operating instructions are part of the product and must be kept in
the immediate vicinity of the instrument and readily accessible to skilled
personnel at any time.
■ Skilled personnel must have carefully read and understood the
operating instructions prior to beginning any work.
■ The manufacturer's liability is void in the case of any damage caused
by using the product contrary to its intended use, non-compliance with
these operating instructions, assignment of insufficiently qualified skilled
personnel or unauthorised modifications to the instrument.
■ The general terms and conditions, contained in the sales
documentation, shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PV 20.01, PV 21.01, PV 21.02,
SP 21.01 and SP 21.03
11581752.02 09/2013 GB/D/F/E
GB