WIKA PGS21 - Manual (Page 18)

WIKA operating instructions models PGS10, PGS11 and PGS21 18
WIKA Alexander Wiegand SE & Co. KG
Alexander-Wiegand-Straße 30
63911 Klingenberg
Germany
Tel. +49 9372 132-0
Fax +49 9372 132-406
E-Mail [email protected]
www.wika.de
Kommanditgesellschaft: Sitz Klingenberg –
Amtsgericht Aschaffenburg HRA 1819
Komplementärin: WIKA Verwaltungs SE & Co. KG –
Sitz Klingenberg – Amtsgericht Aschaffenburg
HRA 4685
Komplementärin:
WIKA International SE - Sitz Klingenberg -
Amtsgericht Aschaffenburg HRB 10505
Vorstand: Alexander Wiegand
Vorsitzender des Aufsichtsrats: Dr. Max Egli
DECLARATION OF PERFORMANCE
according Construction Performance Regulation EU Nr. 305/2011
Document No.: 14059919.02
1. Identification: pressure gauge with switch
2. Model: PGS21.050 according to data sheet SP 21.03
3. Intended use according EN 12094-10: 2003
Components for use in gas extinguishing systems in buildings as part of e complete operating system.
4. Manufacturer:
WIKA Alexander Wiegand SE & Co.KG
Alexander-Wiegand-Str. 30, DE 63911 Klingenberg
5. Representative: Not applicable
6. Assessment: System 1
7. Notified body:
VdS Schadenverhütung GmbH, 0786 has performed type testing of the product, initial inspection of the
manufacturing plant and of factory production control with continuous surveillance, assessment and
evaluation of factory production control under system 1 and issued following certificate of certificate of
conformity 0786-CPD-30095.
8. European Technical Assessment: Not applicable
9. Declared performance:
Essential Characteristics Performance EN 12094-10:2003
Operational reliability -- general pass 4.1.1
Nominal activation conditions/sensitivity
- accuracy class and nominal size pass 4.1.2
Durability of operational reliability against - corrosion pass 4.1.3
Nominal activation conditions/sensitivity
- accuracy class and nominal size pass 4.2.1
Operational reliability
- Design
- Internal pressure
- Operational reliability
- Temperature
pass
pass
pass
pass
4.2.2
4.2.3
4.2.4
4.2.5
Durability of operational reliability against - corrosion pass 4.2.6
10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point
9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.
Signed for and on behalf of
WIKA Alexander Wiegand SE & Co. KG
Klingenberg, 2013-08-02
Company devision: MP-IG Quality management: MP-IG
Peter Koll Daniel Kotlewski
Signature authorized by the company
Appendix 2: Declaration of performance model PGS21.050
11581752.02 09/2013 GB/D/F/E
GB