Kramer Electronics VS-162AVRCA - Manual (Page 40)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
MENU Commands Sequence
36
Figure 17: Choosing the MTX (SYNC from Matrix) Setting
8.3.2 Configuring a SWITCHING METHOD
To choose a SWITCHING METHOD setting, do the following:
1. Press the MENU button until you reach the SWITCHING METHOD setting.
The MATRIX Display shows the message:
SWITCHING METHOD setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The Displays show the messages:
Use OUTkey to configure
1: noVIS 2: EXT 3: INT#1 4:MTX
Current
External 1
3. Press an OUT button from 1, 2, 3 or 4. For example, OUT button # 3 to
set the internal sync configuration.
The TAKE LED blinks and the MATRIX Display shows the message:
Press TAKE to configure
from INTERNAL (Input #1)
4. Press the TAKE button.
The Displays show the messages:
SWITCHING METHOD
changed
current:
From In #1
1 Indicating that the machine is currently set to the external switching method setting