Kramer Electronics VS-162AVRCA - Manual (Page 26)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Audio-Video Matrix Switcher
22
7.2.2 Confirming Settings
Choose to work in the AT ONCE mode or the CONFIRM mode:
In the AT ONCE (default
1 ) mode:
Actions require no user confirmation
Execution is immediate
No protection is offered against changing an action in error
In the CONFIRM mode 2 :
You have an optional method to help avoid making a mistake
Every action requires user confirmation
Execution is delayed
3 until the user confirms the action
Protection is offered to prevent erroneous switching
You can key-in several actions and then confirm them by pressing the
TAKE button once, to simultaneously switch several outputs
7.2.2.1 Toggling between the AT ONCE and CONFIRM Modes
To toggle between the AT ONCE (default) mode and the CONFIRM mode,
press the TAKE button.
In CONFIRM mode: Actions require user confirmation and the TAKE LED lights.
In AT ONCE mode: Actions do not require user confirmation and the TAKE
LED does not light.
When the TAKE LED blinks:
You cannot toggle between the AT ONCE and CONFIRM modes
You can execute the previous action, by pressing the TAKE button
You can cancel the previous action, by pressing a non-relevant button (for
example, the MENU button)
1 For all actions except storing/recalling setups
2 The CONFIRM mode is the default for storing/recalling setups (see section 8.5)
3 Failure to press the TAKE button within about 30 seconds (the Timeout) will abort the action