Kramer Electronics VS-162AVRCA - Manual (Page 34)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Audio-Video Matrix Switcher
30
7.2.5.2 Recalling Setups
To recall a setting, do the following:
1. Press the RCL button.
The Displays show the messages:
Enter SETUP number
use two digit # 01-60
RECALL
# xy
Where xy are the OUT buttons.
2. Press the appropriate two OUT buttons, using the OUTkeys # 1 to 9, and
10 (for 0). The OUTkeys function on a decimal-basis, and not on a
positional-basis. For example, to enter the # 14, press # 1 followed by # 4
(not # 14). To enter the # 3, press # 3 followed by the TAKE button 1 .
The memory recalls the setup. The MATRIX Display shows the blinking
setup, and the TAKE LED as well as the appropriate mode button 2 blinks.
The STATUS Display shows the message:
RECALL
# xy
Where xy are the OUT buttons.
3. Preview the setup to decide if to implement it, by pressing the:
VIDEO or the AUDIO button, for video or audio setups in the
BREAKAWAY mode. Pressing the AFV button will have no effect if setups are
stored in the BREAKAWAY mode
AFV button, for setups in the AUDIO-FOLLOW-VIDEO mode. Pressing
the VIDEO or the AUDIO button will have no effect if setups are stored in the
AUDIO-FOLLOW-VIDEO mode
If you decide not to implement the setup, you can scan the other setups,
by pressing different OUT buttons. To stop previewing the setups, press a
non-relevant button, for example, an IN button.
4. Press the TAKE button.
The specific setup is implemented.
If trying to recall an empty setup 3 , the MATRIX Display would show a
message saying that that particular setup is empty and would return you to
step 1 above.
1 Alternatively, pressing # 10 followed by # 3 will also enter the # 3
2 VIDEO, AUDIO or AFV
3 That is, a setup # for which no setup is actually stored