Kramer Electronics VS-162AVRCA - Manual (Page 16)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the Audio-Video Matrix Switcher
12
Table 5: Machine # Dipswitch Settings
DIPSWITCH MACHINE #
1 2 3 4
1 ON OFF OFF OFF
2 OFF ON OFF OFF
3 ON ON OFF OFF
4 OFF OFF ON OFF
5 ON OFF ON OFF
6 OFF ON ON OFF
7 ON ON ON OFF
8 OFF OFF OFF ON
9 ON OFF OFF ON
10 OFF ON OFF ON
11 ON ON OFF ON
12 OFF OFF ON ON
13 ON OFF ON ON
14 OFF ON ON ON
15 ON ON ON ON
6.3.2 Understanding the SYSTEM Mode
The terms audio-follow-video 1 and audio breakaway 2 are well known.
Sometimes signals other than audio signals need to switch simultaneously and
at other times, need to switch independently. For example:
Non-linear editing systems, that sometimes combine video with analog
audio and at other times combine video with digital audio
Duplication systems, that make Master tapes from programs with
different formats: composite analog, component analog and component digital
DIP 5 defines whether the unit communicates with other switchers via a
common control line.
You can set
DIP 5 OFF to disable the Follow-SYSTEM mode in Stand alone
switcher applications 3 .
You must set DIP 5 ON to enable the Follow-SYSTEM mode in an
interconnected varied-format switcher application 4 .
Refer to section 8.2 for a description of the MENU’s Follow-SYSTEM and
Breakaway-from- SYSTEM modes.
1 Video and the audio channels switch simultaneously in the same way
2 Audio channels switch independently from the video channels
3 See section 6.1
4 See section 6.2