Kramer Electronics VP-8x8 - Manual (Page 20)

VP-8x8 - Operating the VP-8x8 8x8 VGA/UXGA Matrix Switcher 17
17

No protection is offered against changing an action in error
In the Confirm mode (TAKE button is illuminated):

You can key-in several actions and then confirm them by pressing the TAKE
button, to simultaneously activate the multiple switches

Every action requires user confirmation, protecting against erroneous
switching

Execution is delayed until the user confirms the action
Failure to press the TAKE button within one minute (the Timeout) will abort the action
6.2.1 Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes, do the following:
1. Press the dim TAKE button to toggle from the At Once mode (in which the
TAKE button is dim) to the Confirm mode (in which the TAKE button
illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the Confirm mode back to
the At Once mode.
Actions no longer require user confirmation and the TAKE button no longer
illuminates.
6.2.2 Confirming a Switching Action
To confirm a switching action (in the Confirm mode), do the following:
1. Press an OUT-IN combination.
The corresponding 7-segment display flashes. The TAKE button also
flashes.
2. Press the flashing TAKE button to confirm the action.
The corresponding 7-segment display no longer flashes. The TAKE button
illuminates.