Kramer Electronics VP-4x8 - Manual (Page 23)

20 VP-4x8 - Operating the VP-4x8
6.2.2 Confirming a Switching Action
To confirm a switching action (in the Confirm mode), do the following:
1. Press an OUT-IN combination.
The corresponding 7-segment Display flashes. The TAKE button also
flashes.
2. Press the flashing TAKE button to confirm the action.
The corresponding 7-segment Display no longer flashes. The TAKE button
illuminates.
To confirm several actions (in the Confirm mode), do the following:
1. Press each OUT-IN combination in sequence.
The corresponding 7-segment display flashes. The TAKE button also
flashes.
2. Press the flashing TAKE button to confirm all the actions.
The corresponding 7-segment display no longer flashes. The TAKE button
illuminates.
6.3 Storing/Recalling Input/Output Configurations
You can store and recall up to 12 input/output configurations using the 4 input
buttons and the 8 output buttons, as shown in Figure 11 :
Figure 11: Storing and Recalling using the Input/Output Buttons