Kramer Electronics VP-4x8 - Manual (Page 15)

12 VP-4x8 - Connecting the VP-4x8
5.4 Connecting the Ethernet Port
You can connect to the VP-4x8 to the Ethernet using either of the following
methods:
•
Direct connection to the PC using a crossover cable (see Section 5.4.1 )
•
Connection via a network hub, switch, or router, using a straight-through cable
(see Section 5.4.2 )
5.4.1 Connecting the Ethernet Port Directly to a PC (Crossover
Cable)
You can connect the Ethernet port of the VP-4x8 to the Ethernet port on your PC,
via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the VP-4x8
with the factory configured default IP address.
After connecting the Ethernet port, configure your PC as follows:
1. Right-click the My Network Places icon on your desktop.
2. Select Properties.
3. Right-click Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see
Figure 7 ).
i