Kramer Electronics VP-4x8 - Manual (Page 22)

VP-4x8 - Operating the VP-4x8 19
6.2 Confirming Settings
You can choose to work in the At Once or the Confirm mode.
In the At Once mode (the TAKE button is not illuminated):
•
Pressing an OUT-IN combination implements the switch immediately
•
You save time as execution is immediate and actions require no user
confirmation
•
No protection is offered against changing an action in error
In the Confirm mode (TAKE button is illuminated):
•
You can key-in several actions and then confirm them by pressing the TAKE
button, to simultaneously activate the multiple switches
•
Every action requires user confirmation, protecting against erroneous
switching
•
Execution is delayed until the user confirms the action
Not pressing the TAKE button within one minute aborts the action.
6.2.1 Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes, do the following:
1. Press the dim TAKE button to toggle from the At Once mode (in which the
TAKE button is dim) to the Confirm mode (in which the TAKE button
illuminates).
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the Confirm mode back to
the At Once mode.
Actions no longer require user confirmation and the TAKE button no longer
illuminates.