Kramer Electronics VP-200xlTHD - Manual (Page 13)

Connecting the VP-200XLTHD
11
Figure 6 and Table 6 define the underside of the VP-5R CAT 5 Receiver/1:5
VGA/UXGA Distributor.
Figure 6: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Underside
Table 6: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Underside Features
# Feature Function
1 V SYNC Switch Slide the switch to the right 1 to change the V SYNC polarity;
slide the switch to the left to retain the polarity
2 H SYNC Switch Slide the switch to the right
1
to change the H SYNC polarity;
slide the switch to the left to retain the polarity
7 Connecting the VP-200XLTHD
You can use the VP-200XLTHD and, for example, the TP-120 to configure an XGA
line-to-Twisted Pair transmitter and receiver system.
To connect the VP-200XLTHD to the TP-120, as the example in Figure 7
illustrates:
1. On the VP-200XLTHD connect the:
ƒ Computer graphics (XGA) source (for example, a computer) to the
INPUT 15-pin HD connector
ƒ XGA OUT 15-pin HD connector to the acceptor (for example, to a
projector)
2. On the TP-120, connect the XGA OUT 15-pin HD connector to the XGA acceptor
(for example, a display).
1 By default, both switches are set to the left