Kramer Electronics VP-200xlTHD - Manual (Page 12)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor
10
6 Defining the VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor
The VP-5R is a high-performance distributor for computer graphics signals,
receiving the computer graphics signal via STP CAT 5 cable, and distributing the
signal to five identical 15-pin HD outputs.
In particular, the VP-5R:
• Features front panel line input level and EQ. control, as well as output EQ.
control
• Is mains fed
• Is housed in a half-width 19" enclosure
Figure 5 and Table 5 define the VP-5R.
Figure 5: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor
Table 5: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 LINE INPUT LEVEL Trimmer Turn to adjust
1
the video input level
3 LINE INPUT EQ. Trimmer Turn to adjust
1
the video input EQ. (equalization) compensation
4 OUTPUT EQ. Trimmer Turn to adjust 1 the video output EQ. (equalization) compensation
5 CAT 5 LINE IN RJ-45 Connector Connect to
2
the LINE OUT RJ-45 connector on the VP-5THD
6 OUTPUT 15-pin HD Connector Connect to the VGA/UXGA acceptor(s) (from 1 to 5)
7 Power Connector with Fuse Connect to the AC mains using the supplied power cable
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 Using an STP CAT 5 cable with RJ-45 connectors at both ends (the pinout is defined in Table 7 and Figure 9 )