Festo Контроллер крайних положений SPC11 - Manual (Page 33)

2. Parameters of the SPC11 for the DGCI or DDLI
2-7
Festo P.BE-SPC11-DGCI-EN en 1406d
The parameters listed in sections 2.3 and 2.4 match exactly
the specified combinations of valves, drives, mass loads and
mounting positions.
Note
Faultless operation can only be guaranteed if all compo-
nents are fitted correctly.
• Use only the specified combinations of valves, drives
and mass loads.
• Observe the installation instructions in chapter 1 as well
as in the System Manual.