Festo Контроллер крайних положений SPC11 - Manual (Page 12)

Contents and general safety instructions
X
Festo P.BE-SPC11-DGCI-EN en 1406d
Notes on the use of this manual
This manual contains special information on installing
and commissioning the SPC11 in conjunction with drive
DGCI or DDLI.
General basic information on the method of operation, fitting,
installing and commissioning pneumatic drives with the
SPC11 can be found in the system manual P.BE-
SPC11-SYS-... .
Manuals for the SPC11
Manual Designation Content
System Manual
Soft Stop SPC11 Electronics/
Pneumatics P.BE-SPC11-SYS... General instructions on installing and
commissioning
Drive-specific supplement for operat-
ing the SPC11 with a certain drive, e.g.
with the DGCI-... (e.g. this manual) P.BE-SPC11-...-... Special installation and commission-
ing instructions as well as parameter
settings for the relevant drive
1)
1) These manuals contain the permitted drive-valve combinations, drive diameters and mass loads as
well as the valid parameter settings of the SPC11.
Note
For installation and commissioning you will require the
System Manual as well as the “Drive-Specific Supplement”
manual for the drive used.