Festo Контроллер крайних положений SPC11 - Manual (Page 24)

1. Installation instructions for the DGCI or DDLI
1-12
Festo P.BE-SPC11-DGCI-EN en 1406d
Fixed stops (
7 )
With drives of type DGCI-... you can use as a fixed stop either
the integrated original stops, the shock absorber support
(without the shock absorber) type DADP-DGC-... together with
stops type KYC-... or suitable external stops.
The use of shock absorbers is not permitted.
1
2
2
3
1
1
Integrated original stops (drive end length)
2
Stop type KYC-...
3
Shock absorber support type DADP-DGC
Fig. 1/5: Fixed stops (Example DGCI)
With drives of type DDLI external fixed stops on the mounting
slide are required.
Mass load (
8 )
Fit the mass load free of play. Use the compensating coupling
DARD from Festo.
Possible moving mass loads see “Parameters for the DGCI-...”
in chapter 2. The tables listed there contain all the permitted
combinations of drive, valve and mass load.