Festo Пневматические линейные приводы SLG - Manual (Page 28)

SLG−...
Festo SLG−... 0802d English
28
7 Operation
Please note
As a result of possible faults in the strucĆ
ture or in the controller, the component
will not react as expected under certain
circumstances.
S Make sure that:
ć nobody can reach into the positioning
range of the moving mass (e.g. by
means of a protective screen)
ć foreign objects do not enter the
positioning range of the moving mass.
With non−horizontal slide movements on the
SLG−...:
S Use cushioning variant with shock abĆ
sorber of type YSRG−...
With large work loads and high slide speeds:
S use shock absorbers or stops where possĆ
ible at the level of the centre of mass of
the work load.
Without external measures, the compoĆ
nent reacts to the loads as in Fig. 28.
Fig. 26
Fig. 27
УУУУУ
УУ
УУ