Festo Пневматические линейные приводы SLG - Manual (Page 22)

SLG−...
Festo SLG−... 0802d English
22
5 Fitting
Mechanical fitting
S Prevent the sealing band from being
pressed or sucked in.
Damage to the sealing band reduces the
operating reliability.
A sudden jerk movement of the pressureĆ
less slide can create a low pressure which sucks the sealing band into the
piston chamber.
S Place the component in position with reĆ
gard to the following points:
ć You must be able to gain access to the
operating parts and connections later
when the component is installed.
ć The fitting position takes into account
the minimum distances required for
reliable operation of the proximity
switches used.
L
1
L
2
= L
3
L
4
L
5
(SME−10−...) (SMT−10−...)
L
1
L
5
SLG−8−... as desired 10 mm 17 mm 4 mm
SLG−12−... 12 mm as desired
SLG−18−... 46 mm 26 mm
Fig. 8
If the minimum distances are not observed, an individual functional check may
be necessary.
Fig. 6
Fig. 7