Festo Пневматические линейные приводы SLG - Manual (Page 19)

SLG−...
Festo SLG−... 0802d English
19
Linear drive SLG−... English
1 Operating parts and connections
1
2
3
4
5
6 7 8
9
aJ
1 Groove for fastening the proximity switch
2 Threaded holes for the compressed air connection (alternative connections are
sealed with threaded pins)
3 Accurate adjustment of the stop
4 Locking screws for rough adjustment of the stop
5 Through holes for fastening the drive directly
6 End position cushioning (either ...−P or with YSRG−...)
7 Lubricating nipple
8 Centring holes
9
Threaded holes for fastening the work load
aJ Mounting aids geometry (not intended for further use)
Fig. 1