Muxlab Passive CCTV/GLI Hub User Manual

Page 12

Text mode
Original mode

© MuxLab Inc.

Passive CCTV/GLI Hub Installation Guide

Page 12

Output Connections:

Video:

7. Connect one coax cable between each video output

port on the rack and the DVR video input (fig 8).

Figure 7: Video connection

Remote Power:

8. If remote power is being transmitted to the camera,

verify that the distance between the camera and the
hub is within MuxLab specifications. Please consult
the distance charts at the back of the installation
guide. When the port switch is set to Pass-Thru
Mode (500022), two (2) twisted pairs are used for
remote power. When the port switch is set to Power-
Thru Mode (500024/500029), three (3) twisted pairs
are used for remote power thus supporting greater
distance.