Muxlab Passive CCTV Hub - Manual (Page 14)

© MuxLab Inc. Passive CCTV Hub Installation Guide
Page 14
5. In order to transmit video on one (1) twisted pair, remote power on two (2)
twisted pairs and control on one (1) twisted pair, set the port switch to
Pass-Thru Mode (500022) as shown in figure 13. Ensure that there is a
CCTV Pass-Thru Balun (500022) at the camera.
Figure 13: Port Setting – Pass-Thru Mode (500022)
6. In order to transmit video on one (1) twisted pair and remote power on
three (3) twisted pairs, set the port switch to Power-Thru Mode
(500024/500029) as shown in figure 14. Ensure that there is a CCTV
Power-Thru Balun (500024 or 500029) at the camera.
Figure 14: Port Setting – Power-Thru Mode (500024/500029)
Output Connections:
Video:
7. Install a CCTV balun on each port of the DVR. The products that may be
connected include; 500000, 500009, 500015, 5000023 or 500122.