Muxlab Audio-Video Distribution Hub - Manual (Page 11)

MuxLab Inc. Troubleshooting
Page 11
RJ45 Pin Configuration
Video 2: Ring 4 Tip 5
Audio 2: Ring 3 Tip 6
Audio 1: Ring 1 Tip 2
Video 1: Ring 7 Tip 8
Looping Output Input
NC
+ 12V
GND
-12V
Power
Video 1
Video 2
VideoEase 2-Way
Audio/Video Balun
(500012)
Audio1
Audio 2
Cat 5 Twisted Pair
(4-Pair)
RJ45
8-pin modular plug
Video 1
Video 2
Audio1
Audio 2
Power 4 Outputs
Figure 5 : Connection Diagram
6. Connect the cable coming from the audio-video source to the Input
located on the back of the Audio-Video Hub.
7. Connect, one at a time, the twisted pair cables coming from the audio-
video destinations into the front-panel ports. Power on the source
and destination equipment and send an audio/video signal from the
source. Verify the presence and quality of the audio and video.