Muxlab LongReach™ - Manual (Page 6)

© MuxLab Inc. Active CCTV Receiver Balun Installation Guide
Page 6
2.
Technical Specifications
Environment CCTV equipment for security and surveillance. RS-343 (RS-170)
Devices CCTV cameras , monitors, DVR, switchers, multiplexers and other
CCTV equipment.
Transmission Transparent to the user
Bandwidth DC to 4.5 MHz
Input 1.5 Vp-p max, 100 ohms, balanced
Output 1.1 Vp-p, ±1 dB, 75 ohms, unbalanced
Insertion Loss Determined by Automatic Gain Control.
Luma: -14 dB minimum
Chroma: -60 dB minimum
Return Loss Greater than 15 dB over the frequency range
Common Mode Rejection
Ratio (CMRR) Greater than 40 dB at 3.85 MHz
Maximum Distance
Color or Black & White Category 5E/6 UTP/STP: 1 mile (1.6 km)
LED Indicators Green (Dim): Power
Green (Bright): Video Signal and AC power
Red: Ground Loop Fault
Cable:
Cat 5E/6 UTP/STP 24 gauge or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/ft
Attenuation: 6.6 dB/1,000 ft at 1 MHz
Cable: BNC Impedance: 5 ohms at 1 MHz (RG59/U or RG6)
Input Connectors Video: Two (2) screw terminals; reverse polarity sensitive
Power: Two (2) screw terminals
Ground: One (1) screw terminal
Output Connector Video: Male BNC with 5” coax lead
Power 24V (AC or DC) floating ±20%, 110 mA RMS typical, 3W RMS max.
Video IN/OUT Surge
protection ±1.5V max permanent voltage positive or negative pulse, 3V max. 1
ms
AC/DC power surge
protection Above 30 VAC RMS or 42 VDC
Built-In Fuse Protection Auto-resetting upon power off. Not user serviceable.
Temperature Operating: 0° to 45°C Humidity: Up to 95% non-condensing
Storage: -20° to 85°C
Enclosure Fire retardant plastic (black)
Dimensions: 2.40” x 2.25” x 1.00” plus 5” coax lead
Mounting Velcro pad for optional surface mounting
Regulatory FCC, CE
Warranty 1 year
Order Information 500015 Active CCTV Receiver Balun