RMS Technologies IMD 34 W/ POLE DAMPING TECHNOLOGY*NEW* - Manual (Page 26)

RMS Technologies Page 26 Version 1.00
IMD34 / IMDE34 User Manual 4/28/2009
10
GUI Error Codes
This error occurs if you click on “Save DATA”
and the board EEPROM does not respond.
Check for main power
Check for communication connection
Check COM Port number
This error occurs when you click on
“Connect” and the COM Port does not
respond.
Check for main power
Check for communication connection
Check COM Port number
This error occurs when you click on “Set” or
“Set All” and the driver board is not
receiving data from the PC.
Check for main power
Check for communication connection
Check COM Port number
This error occurs when you click on “Read
Data” and the device could not read any
parameters.
Check for main power
Check for communication connection
Check COM Port number