ADC EMU-830 - Manual (Page 50)

Chapter 3: Provisioning September 25, 2006
3-18 LTPE-UM-3159-02
To set the date and time:
Change Password
In the Config menu, press P to display the Change Password dialog box ( Figure 3-13 on page 3-19 ). This dialog box
is used to select or change your password. You can use the letters A through Z (case sensitive), numbers 0 through
9, spaces, and any keyboard symbol.
To select or change your password:
Step Action
1 Use the
Ç
and
È
arrow keys to select the DD/MM/YYYY and HH:MM:SS fields. Enter the current date
and time in the respective fields.
2 Press ENTER to confirm settings and return to the top of the Config menu.
Figure 3-12. Set Date/Time Dialog Box
Step Action
1 Do one of the following:
a. If you do not have a password, press ENTER.
b. Type your old password and press ENTER.
2 When the second password screen is displayed, type the new password (20 characters maximum), then
press ENTER.
3 When the next password screen appears, re-enter the new password (exactly as originally entered), then
press ENTER.