Edsal 1UGK8 - Manual (Page 4)

Beginning with the bottom level,
install the Wire Decking and Bins.
The Wire Decks are formed to fit
either 3 large, 4 medium, or 5 small
bins. Install the large bins on the
bottom and small bins on the top as
illustrated. Place the wire deck on
the beams and set the bins on the
deck. Start at the bottom level and
work your way up.
The flat wire deck is placed on the
top level and can be used as a
shelf.
33” long,
1 Rivet Beams
Flat Wire Decks
Step 6 Step 6 Step 6
Install the remaining 33”
long, 1 Rivet Beams at the
recommended hole
spacing between them.
As before, insert the rivets
on the Beams into the slots
on the Posts and tap them
down until they are fully
seated.
Step 7 Step 7 Step 7
2 Holes
2 Holes
2 Holes
4 Holes
4 Holes
4 Holes
4 Holes
4 Holes
4 Holes
Begin with the bottom level and the large bins,
then work upward
Small Bins
3 levels of 10 bins
Medium Bins
3 levels of 8 bins
Large Bins
3 levels of 6 bins