Edsal 1UGK8 User Manual

Page 2

Repeat to assemble
2nd Double Post

Step 2

Assemble the front and back frames.

Using 2 of the 33” Double-Rivet
Beams assemble the rear frame as
shown. Use the Double Posts on
the right side, with the connected
side facing the inside of the unit. In-
sert the rivets on the Beams into the
slots on the Posts and gently tap
down until they are fully seated.

Repeat the process to build a
matching front frame.

Assemble the
rear frame

Step 3

Insert rivets
and tap down

Use the 33” long,
2 Rivet Beams

33” long,
2 Rivet Beam

Repeat to assemble
the front frame

Double Post
on right with
flanges
inward

Assemble the 2 Double Posts, which
are used in the center of the unit.

Take 2 Posts and insert the 2-Post
Caster into the bottom brackets.
Install 2 of the Post Couplings in the
specified holes to lock the Posts
together. Make sure the Caster and
Couplings are fully seated.

Repeat to assemble the second
Double Post.

Insert Post
Coupling and
align

Tap down

Insert 2-
Post
Caster into
Posts

Make sure
Caster is fully
inserted

Insert in the
4th and 5th
holes from
top of post

Insert in the
23rd and
24th holes
from top of
post