Edsal HDL301260 User Manual

Light duty steel shelving

Safety Instructions

These units should be placed on a level surface. Failure to do so can result in poor product performance or create a
possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not
included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY
PART OF THE UNIT, OR USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the

heavier loads on the bottom. Use care when working with metal parts.

Light Duty
Steel Shelving

MODEL NUMBER

HDL301260

HDL301260 4 Shelf

60”h x 12”d x 30”w

Description

A - Shelf
B - Post
C - Brace
D - Gussets
E - Hardware
F - Ft. Protector

Qty.

4
8
6
4

Part Number

HHSH3314

HHPT3102

HHBR2001

HHGU0501

NB58

FP100

Part Size

30” x 12”

31”

20 7/32”

5”

N/A
N/A

General Instructions

Assembly is done with the nuts and bolts fitting into the holes of the post and shelf. A regular blade screw driver, 3/8”
socket wrench, or a 3/8” nut driver will be the tools necessary to complete the assembly. During shipping and handling,
some of the parts may bend. Use care when forming them back to the original shape by hand. To assure squareness
of the unit, do not fully tighten the nuts and bolts until final assembly is complete.

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel

free to contact our Muscle Rack manufacturing facility at, (773) 475-3000 and request customer service.

We can also be reached on the internet at the following email address : [email protected].

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609 www.edsal.com

Light Duty Steel Shelving

F - Foot Protector

E - 10-24x1/2”

D - Gusset

B - Post

C - Brace

A - Shelf