Edsal UR184884WR6 User Manual

Heavy duty shelving

Safety Instructions

These units should be placed on a level surface. Failure to do so can result in poor product performance or create a
possible safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not
included. Do not use this unit for anything other than the manufactures intended purpose. DO NOT STAND ON ANY
PART OF THE UNIT, OR USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the

heavier loads on the bottom. Use care when working with metal parts.

Heavy Duty Shelving

MODEL NUMBER

UR184884WR6

D - Bottom

Post

UR184884WR6 6 Shelf

84”h x 18”d x 48”w

Description

A - Beams
B - Braces
C - Top Post
D - Bottom Post
E - Wire Deck
F - Coupler

Qty.

12
12

4
4
6
4

Part Number

RUBE 4702
RUBE 1702

RCPT3605S
RCPT4805S

WD1848

RMPC0409

Part Size

47 7/16”
17 7/16”

36”
48”

18” x 48”

N/A

General Instructions

Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used
on the beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block
of wood between the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and
fully engaged.

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel

free to contact our Muscle Rack manufacturing facility at, (773) 475-3000 and request customer service.

We can also be reached on the internet at the following email address : [email protected].

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Consumer Products Division
Edsal Manufacturing Company
Made In China
4400 South Packers Avenue
Chicago, IL 60609 www.edsal.com

A - Beams

B - Braces

C - Top

Post

E - Wire Deck

F - Post Coupler