Edsal 7004 - Manual

Use Caution when handling and assembling metal parts. The metal may have sharp edges or corners. The use of
protective gloves is recommended. This unit should be securely anchored to a wall with suitable fasteners. Do not
use this unit for anything that is outside the designed function of storage. Do not store loose or heavy items on the
top shelves or on the top of the unit, for they create a falling hazard that can injure yourself or others. Always re-
member to use proper lifting techniques when moving either the boxed or assembled unit.
Safety Instructions Safety Instructions Safety Instructions
It is recommended that the cabinets are assembled by more than one person. The use of a raised flat surface dur-
ing assembly is highly recommended. During shipping and handling, some of the tabs that are used for assembly
may have closed together. Use a flat tipped screwdriver to either pry up or push from behind the tab to re-open.
Make sure that the unit is placed on a level surface, as this may effect the performance of the unit.
General instructions General instructions General instructions
Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free to contact our Edsal
manufacturing facility at, (773) 475-3000 and request customer service. We can also be reached on the internet at the following email
address : [email protected].
To obtain replacement parts, please provide the following information :
- Model # - Part # & Description - Location Purchased - Date Purchased
(F) Bottom (G) Top Shelf
Required Tools Required Tools Required Tools
- Rubber Mallet
- Small Blade Screwdriver
- Small Philips Screwdriver
(handle assembly)
(I) Right Door (J) Left Door
(H) Shelf Clips
Consumer Products Division
Edsal Manufacturing Company
4400 South Packers Avenue
Chicago, IL 60609
www.edsal.com
Made In China
Quick Assemble Combination Cabinet
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
Right Hand Back
Left Hand Back
Right Hand Side
Left Hand Side
Top
Bottom
Top Shelf
Shelf Clips
Right Hand Door
Left Hand Door
Door Rods
Kick Plate
Handle
Hanger Rod
Half Shelves
Divider
10-24X3/8”
Screw & Nut
Anchor Hardware
(IF SUPPLIED)
1
1
1
1
1
1
1
10
1
1
2
1
1
1
4
1
6
2
CBBK7218R KA
CBBK7218L KA
CBSD7222R KA
CBSD7222L KA
CBTO3922 KA
CBBO3718-2 KA
CCSH3719-3 KA
7000CLP
CBDO6718R KA
CBDO6718L KA
CCDR3325 KA
CBKP3606 KA
201L
CCHG2202
CCSH2018
CCDV5721 KA
F102438S & N
TB2
(L) Kick Plate
(E) Top
(M) Handle
(R) Anchor Hardware
(suggested type of hardware, NOT
ALL UNITS ARE SUPPLIED)
(A) Right Hand Back (B) Left Hand Back (C) Right Hand Side (D) Left Hand Side
Page 1
(N) Hanger Rod
(Q) 10-24 x 3/8”
Screws & Nuts
(P) Divider
(O) Half Shelves
(K) Door Rods
MODELS
RTA7004 RTA7004 RTA7004 - - - 1UFA4 1UFA4 1UFA4 - - - 1UFA5 1UFA5 1UFA5 - - - 1UFA6 1UFA6 1UFA6
Part List & Product Specification Part List & Product Specification Part List & Product Specification
(patent pending) (patent pending) (patent pending)
Reference Reference Reference Description Description Description
5 Shelf 5 Shelf 5 Shelf – – – 72” h x 18” d x 36” w 72” h x 18” d x 36” w 72” h x 18” d x 36” w
RTA7004 RTA7004 RTA7004 - - - 1UFA4 1UFA4 1UFA4 - - - 1UFA5 1UFA5 1UFA5 - - - 1UFA6 1UFA6 1UFA6