Goulds Pumps ICP - IOM - Manual (Page 29)

Installation, Operating and Maintenance Instruction Model ICP
ICP 100-English page 20 Revision 00
Article No 24264412 Issue 05/2006
9.2 Stand-by pumps
It is essential that a sufficient number of stand-
by pumps are kept ready for use in plants
where failure of a pump could endanger human
life or cause damage to property or high costs.
Regular checks should be carried out to ensure
that such pumps are always ready for use (see
chapter 6.8).
Store stand-by pumps according to chapter 6.8.
10. Faults - Causes and Solutions
The following notes on causes of faults and how to
repair them are intended as an aid to recognising the
problem. The manufacturer's Customer Service De-
partment is available to help repair faults that the op-
erator cannot or does not want to repair. If the opera-
tor repairs or changes the pump, the design data on
the Data Sheet and chapter 2 of these Operating In-
structions should be particularly taken into account. If
necessary, the written agreement of the manufacturer
must be obtained.