Goulds Pumps ICP - IOM - Manual (Page 11)

Installation, Operating and Maintenance Instruction Model ICP
ICP 100-English page 2 Revision 00
Article No 24264412 Issue 05/2006
Pump Name Plate
TYPE *) Type and size of pump
S/N *) Serial number
YEAR Year of construction
Q
Rated capacity at the operating point
P Rated power at the operating point
H Head (Energy head) at the operating point
N Speed
P
all w C
Max. permitted casing-operation-pressure
(=highest discharge pressure at the rated
operating temperature to which the pump
casing can be used).
TEMP Rated operating temperature of pumped
liquid
ITEM NO Customer equipment number
MATL Material of construction
*) All details of design and materials are defined with
this information. They must be stated on all inquiries
to the manufacturer resp. orders of spare.
ATEX-Label (only for pumps in compliance with EC directive 94/9/EC)
CE
Marking of compliance with the EC directive
94/9/EC
Ex specific marking for explosion protection
II Symbol for the appliance group
2G Symbol for the category (2), explosive atmos-
phere due to gases, vapors or mist (G)
c Symbol for used ignition protection (construc-
tual safety "c")
T1-T. Symbol for classification of the theoretically
available range of the temperature classes -
data for temperature class refer to chapter
2.7.5; Data for maximum permitted tempera-
ture of pumped liquid refer to pump name
plate, data sheet and / or order confirmation.
The conformity with the EC directive 94/9/EC "
Equipment and Protective Systems for Use in Poten-
tially Explosive Atmospheres " is declared by the is-
sue of the EC-Declaration of Conformity and the at-
tachment of the ATEX-label at the pump (bearing
bracket). The ATEX-label is attached additionally to
the pump name plate.