Myron L 9PTK with FCE Free Chlorine User Manual

Page 53

Calibration of the Ultrameter III gain Factor for User mode is

not available when the calibration linc has been established.

The other calibration functions (i.e., Temperature Compensation

%/C settings and TDS Ratio settings) are still intact. To perform

a calibration of the User mode as described in User Calibration

Conductivity/TDS, pg. 29, the User mode Linc should be canceled.

See above, “Canceling User mode calibration “linc””.

Once a “linc” has been established for User mode, the “linc”

will apply to all measurement modes using User solution

selection (i.e., TDS/User, Cond/User or Res/User).

Xvi. bluDock™ wireless Data transFer instrUctiOns

nOte: Bluetooth® is a registered trademark of Bluetooth SIg. The

bluDock Bluetooth module is a registered Bluetooth device.

Requires Myron L bluDock™ accessory package, Model # BLUDOCK.

Package includes Ultrameter III hardware modification that allows the

unit to communicate wirelessly with a personal computer configured for

wireless device communication. Package also includes U2CI software

application that will operate on Windows XP, Vista and 7*, and Macintosh

OSX** based computer systems and Bluetooth USB adapter (dongle)

for computers that do not have Bluetooth capability.

A. Software Installation

Place Myron L Ultrameter III U2CI Installation CD v2.0.0 &

later into your computer or download U2CI application from the

Myron L website:

http://myronl.com/main/U2CI_Application_DL.htm

Upon opening, select the folder for your operating system.

Install U2CI application. See detailed installation instructions

on CD or Myron L website:

http://myronl.com/main/U2CI_Application_DL.htm

Additional drivers may be required. See our website for the

latest information.

B. Hardware Setup

For a computer without Bluetooth® capability:

If you don’t have the dongle that came with the BLUDOCK, one can be

ordered separately from the Myron L Company. Order Model # BDDO.

Plug in your dongle and install per manufacturer’s instructions.