Pathway LR Manual - Manual (Page 19)

DMXPathfinder LR DMXPathfinder Operations
18
Select View from the main menu. Choose DMXPathfinder Hardware
Setup. Click on the DMXPathfinder System Configuration tab.
Notice that there are several panes of parameter information contained in this
window. The # of Input Modules and # of Output Modules define the actual size
of your installation in terms of input and output lines; these parameters should
only be set once when your system is commissioned, and changed only if the
system is expanded. Contact the Factory or your local customer support if you
are unsure about the correct values for these fields.
C
ONFIGURE
U
NIVERSE
DMX Universes need to be set up properly to take full advantage of the
optional DMX address calculation features in DMXQConnect.
On the main menu, click Configure, Universe.