Pathway DMX Manager Plus! #6301, 6302 - Manual (Page 7)

DMXManager Plus! User’s Guide
- 7 - Manual Version 3
There are four lines of information. The top line is the node’s name, which by
default is its IP (Internet Protocol) address as set by the factory.
The second line is blank. Press the or keys to scroll through the following
items:
• Blank line (default)
• Internet protocol (IP) address and netmask
e.g.: “10.1.134.167/8”
• Media Access Control (MAC) address
e.g.: “0:4:a1:1:86:a7”
• Pathway serial number
e.g.: “PP200007”
• Firmware version
e.g.: “Version 3.0.4.1”
The bottom line is a stylized “N”. This icon blinks to indicate network activity,
otherwise it is simply on. If Ethernet protocols other than Pathport are active,
these indicators appear beside the N: “S” for ShowNet, “sA” for streaming
ACN, and “A” for Artnet.
Press √ to edit configuration options.
N ODE AND N ETWORK C ONFIGURATION O PTIONS
If the DMX Manager Plus is to be connected to a network, you may need to
change some of the node properties. Press √ while in the node information
display and the following menu will appear:
Selecting “Node settings” will return this menu:
IP Address
Changes only apply in a network setting. The nature of the IP address and the
address itself can be edited from this menu using the navigation keys to select
Configuration Configuration Configuration Configuration
Node s Node s Node s Node settings... ettings... ettings... ettings...
Factory Factory Factory Factory s s s settings... ettings... ettings... ettings...
Node Settings Node Settings Node Settings Node Settings
IP a IP a IP a IP address... ddress... ddress... ddress...
Node Node Node Node n
n n name... ame... ame... ame...
Pathport Pathport Pathport Pathport Protoco Protoco Protoco Protocol l l l