Vaddio WallVIEW HD-19 DVI/HDMI - Manual (Page 13)

WallVIEW HD-19 DVI/HDMI
WallVIEW HD-19 DVI/HDMI Manual 342-0267 Rev. C Page 13 of 24
General Specifications:
WallVIEW DVI/HDMI HD-19
Part Numbers WallVIEW HD-19 (North America) P/N: 999-6946-000 (Black), 999-6946-000AW (Arctic White)
WallVIEW HD-19 (International) P/N: 999-6946-001(Black), 999-6946-001AW (Arctic White)
Vaddio HD-19
Image Sensor 1/3-Type Exmor High-speed, Progressive Scan CMOS Sensor with 1.3 Megapixels
Video Output
Resolutions
HD: 1080p/60/59.94/50/30/25, 1080i/59.94/50, 720p/59.94/50
SD: 480i/NTSC & 576i/PAL (Crop, Squeeze or Letterbox mode)
Color: The Recessed Color Space Conversion Switch enables the use of either HDMI YCbCr or
DVI-D sRGB (RGBHV) color space for added flexibility.
Lens/ Focal Length 19X Optical Zoom, F=4.5mm wide to 85mm tele end (F1.6-F2.9), Min. Focus Distance 1.0m
Horizontal Viewing Angle 58.1° Wide End to 3.2° Tele End - 16:9 Format
Video S/N Ratio >52 dB
Minimum Illumination 0.7 LUX (F1.6, 50IRE)
Serial Control Protocol RS-232 (Modified VISCA)
Pan Range Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees, Invertible for Ceiling
Mount
Preset Positions 16 (internal), 6 recalled via IR Remote
Tally Light Available through RS-232 Control
Connectors 
12 VDC Power Input: EIAJ-04 Coaxial Power Connector

HD Video Outputs: YPbPr on DE-15 (D-Sub 15-pin HD)

SD Video Output: BNC Connector

RS-232/IR Out: RJ-45 Jack (RS-232 Communication and IR Out (with Quick-Connect -SR
Interfaces)

EZ Power HD Video: RJ-45 Jack, for use with Quick-Connect SR Interface or Quick-
Connect DVI/HDMI SR Interface. Supplies power to the camera and returns HD video from
the camera to the Quick-Connect - SR Systems.
HD Video Select 16-Position Rotary Switch: Used to set HD Video Resolution Output
Camera Settings 10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, SD LB and SQ,
Test Bars
OSD (On Screen Display) for fine tuning
Accessories EZIM HD-SDI Slot Card PN# 998-6900-007
EZIM CCU Slot Card PN# 999-6900-006 - For Use with Quick-Connect CCU Only
Operating Temperature 32° to 104° F (0° to 40° C) / 20% to 80% Relative Humidity
Dimensions (H x W x D) 8.5” (215.9mm) H x 6.75” (171.45mm) W x 7.7” (195.58mm) D
Weight 5.79 lbs. (2.625635463kg.)
Quick-Connect DVI/HDMI SR (Short Range) Interface
Connectors 
Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
 RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port
 Video Output: DE-15 connector for HD Analog Component (Y,PB,PR) video only (No SD Support)
 IR Output: Transmits modulated or non-modulated IR signals received from the HD-19 IR receiver

Video Outputs: DVI-D (Female - Single Link) or HDMI with adapter cable (using the Recessed Color
Space Conversion Switch) , DE-15F (High Density D-Sub 15-Pin F) for HD YPbPr
Cat-5e Cable Distance Up to 100’ (30.5m)
Power Supply 24 VDC, 2 Amp
Dimensions / Weight 1.6” (40.64mm ) H x 8” (203.2mm) W x 6.751” (171.45mm) D, ½-Rack Size / 1.21 lbs.
(0.548846804 kg)
Accessory Options 1-RU Rack Mount Panel for two (2) units (side by side): P/N: 998-6000-003
1m (3.3’) DVI-D Male to HDMI Male P/N: 440-5643-001
3m (10’) DVI-D Male to HDMI Male P/N: 440-5643-003
CONCEAL Wall Mounting System for Vaddio ClearVIEW HD-19
Dimensions 5.125” H x 6.75” W x 10” D (13 cm x 17.15 cm x 25.4 cm)
Weight Approx. 2.4 lbs. (1.1kg)