Vaddio HE120 Operating Instructions - Manual (Page 86)

86
Limiters
This unit comes with settings (referred to as “limiters”) that
restrict the panning and tilting movement ranges.
Depending on the installation locations, obstacles may
exist in the travel range, and the remote camera may make
contact with them.
In cases like this, contact can be prevented by setting the
limiters just before the obstacles.
The positions of four limiters — namely, the upper, lower, left-
most and right-most limits of the travel range — can be set.
Once they have been set, the positions will not be lost even
after the power has been turned off.
The limiters can be set or released both by the wireless
remote control and controller or web setting screen.
Whatever was set or released last takes precedence.
For the controller operations, refer to the Operating
Instructions of the controller.
The settings of the limiters using the wireless remote control
will be described here.